What is Plumbing?

Plumbing is an installation that allows clean water to come from its source and reach us. At the same time, these pipes, which provide clean water installation, help the dirty water to flow through these pipes after the use of clean water.

Plumbing is needed for wastewater to mix with nature. In order for the plumbing to be used without any problems, it must be installed correctly and professionally. In order for the water flowing from the bathroom, toilet and kitchen to reach us without any problems, the plumbing must be placed properly in the house.

How to Install Plumbing?

Water is one of the most important nutrients needed to sustain our lives. Scientifically; Water exists as a molecule. Each molecule consists of two hydrogen atoms joined to one oxygen atom. This means that the chemical formula of water is H₂O.

The first and most important installation that should be present in a building is the plumbing. Because neither cleaning nor cooking can be done without water. Nor can human beings survive without water.

What are the Plumbing Installation Stages?

1-) Installation of Internal Installations

During the internal plumbing process, attention should be paid to aesthetics and to ensure that water reaches homes without any problems. Because interior plumbing is a very difficult form of plumbing to renew. At this stage, pipes through which the water will pass are installed. In order to transfer water to every house without any problems, care should be taken to ensure that the pipes are not curved and the plumbing pipes should be laid in a planned manner accordingly.

After the water pipes are laid in the building, it is necessary to ensure the correct flow of water. It is then installed with a tap and the internal installation phase ends here.

We should also point out that the possibility that the internal installations can be seen from inside the apartment should be considered. Therefore, it is recommended to have an aesthetically pleasing installation. In addition, quality and long-lasting pipes should be used to avoid problems with plumbing over time.

2-) Feeding Pipe Installation

The supply pipe is the installation that allows water to be transferred from its source to the building, that is, to the houses within the building. Another name for the feeding tube line is the socket line. This water line, which is not visible from the outside, is constructed by digging underground. It is produced especially using plastic pipe. Such an installation is necessary to ensure a long service life.

Any problem that occurs in the main source of water will have repercussions on the entire building and perhaps the neighborhood at the end of the day. Therefore, installation operations must be carried out with dedication.

The most important reason for laying the installation underground is to prevent the water in the installation from freezing during the winter months.

As you can see, every detail must be followed meticulously when installing plumbing and a problem-free installation must be achieved.

3-) Installing a Water Meter

Almost all of us know what a water meter is. It is the name given to the devices that measure the water we use in cubic meters and reflect it as an invoice. The 3 basic elements in the water meter are the clock, tap and valve. The water valve is the element that allows the water to be turned off in case of water overflow, pipes bursting, or plumbing leakage. The tap is the device that allows the water in your plumbing system to be drained and delivered to you.

After the last stage, the plumbing installation is completed and it is ready for use.